You are here

Getting Started with the Actor Framework – Part II

September 3, 2015

In the previous installment, we built a very simple program which consisted of a single actor and a single message.  In this part we will create an application that is a bit more complex.  This example consists of two actors: a DAQ actor which can read an analog voltage and a User Interface actor which provides a graphical user interface to display the data.  Let’s get started!

Note: In this tutorial I am assuming the reader is familiar with the process of creating an actor and I will be glossing over some of the step-by-step details of actor and message creation.  If you’re unsure of how to create an actor class, be sure to check out Part 1 of this series here.

To follow along with this tutorial, you will need the following:
•    LabVIEW 2014
•    DAQmx 14.5 (or later)
•    MGI Improved Message Maker (Optional, but highly recommended)

In the previous tutorial, we made the simplest possible actor-based application.  It consisted of a single actor and a single message.  Most applications, however, will require multiple actors communicating with each other using many messages.  In this tutorial, we will take a step in that direction by creating an application with two actors: a DAQ actor that reads data using DAQmx and a UI actor that displays the data to the user.

To start, create a new blank project and save it.  Add the “Actor Framework.lvlib” library to the project by right clicking on “My Computer”, select “Add >> File”, and browse to “C:\Program Files (x86)\National Instruments\LabVIEW 2014\vi.lib\ActorFramework\Actor Framework.lvlib”.

It is my preference to have each actor reside in its own library, so we’ll begin by creating two new libraries “DAQ Actor.lvlib” and “UI Actor.lvlib” by right clicking on “My Computer” and selecting “New >> Library” for each one (you must save the libraries in order to set their names).  Within each of these libraries, create a virtual folder called “Messages” and create a new class with the same name as the library (DAQ Actor.lvclass and UI Actor.lvclass).  Set each new class to inherit from Actor.lvclass.

Now that our actors are created, it is time to start configuring them.  In the UI Actor class, create an override of “Actor” by right clicking the class and selecting “New >> VI for Override” and then selecting “Actor” and clicking OK.  This is the VI we will use to create our user interface shortly.  We’ll also need to create a new method which we will call “Update Data” in the UI Actor class.  This VI will be used to receive data from the DAQ Actor and display it on the UI.  Create this VI by right clicking the UI Actor class and selecting “New >> VI from Static Dispatch Template” and save it as “Update Data”.  We will soon be filling in the contents of these VI’s, but let’s create the VI’s for the DAQ Actor first.

Create two override VI’s in the DAQ Actor class: “Pre Launch” and “Stop”, by following the same process used to create “Actor” previously.  As the names suggest, these override VIs are typically used for actor initialization and cleanup code.  We’ll be creating our DAQ task in “Pre Launch” and clearing our DAQ task in “Stop”. We’ll also need a Static Dispatch method in the DAQ Actor class which we will call “”, which will perform a single shot DAQ read.

We’ll also need a VI to launch our application, so just create a new VI at the top level of your project (outside of any libraries) called “”.

We are now ready to create the two messages needed for this project.  The DAQ actor will have a message that allows the UI actor to tell it to read a data point.  The UI actor will have a message that the DAQ actor can call to pass the data point to the UI.  As such, use the message maker tool to create messages for “” and “Update Data”.  If you use the MGI message maker, it should automatically move the messages to the appropriate Messages virtual folders.  If not, you’ll have to move them in manually.

At this point, your project should look something like this:

Before moving forward in LabVIEW, let’s take a minute to set up our DAQ hardware.  If you have a DAQmx compatible device available that has analog inputs feel free to use it, but for the purposes of this tutorial I will assume we’ll be using simulated hardware.

To create a simulated device, open NI Measurement and Automation Explorer (MAX), right click “Devices and Interfaces” and select “Create New”.  Select “Simulated NI-DAQmx Device of Modular Instrument” and finally choose the X Series PCIe-6320 device as shown in the images below.

Now that our hardware is configured, it is time to start filling in the details of our actors.  We’ll start with the DAQ actor.  In your project, open “DAQ Actor.ctl” (under “DAQ Actor.lvclass”).  This is the control that specifies the data that your actor will contain.  If this is a new concept to you, you can think of this as the “shift register” of a typical Queued Message Handler loop.  This data will persist from one state to the next as the state machine progresses.  The data for this actor will consist of a DAQmx task.  Let’s drop down a DAQmx task control into the “DAQ Actor.ctl” cluster as shown in the following images.  Be sure to save and close “DAQ Actor.ctl” before continuing to the next steps.


Next we will fill in the details of the DAQ actor methods.  Screenshots below show the details required for these VIs.  As you can see, the Pre Launch Init VI creates a new DAQmx task, the Read VI reads an analog value, and the Stop Core VI closes the task.  There are a few points worth noting here.  First, the “Send Update Data” VI is in the “Update Data Ind.lvclass” message class.  Also, the simulated device on my system is called “Dev1”, which is the default name for a new device.  If your device has a different name in MAX, be sure to select that one in the Pre Launch Init VI.  Finally, it is worth noting that this is performing a single shot read (it stops and starts the task after each data point is read).  Most applications need continuous read functionality, but for the sake of simplicity I’ve chosen to do a simple single shot read for this example.

Pre Launch Init




Stop Core

Now we will finish up our application by filling in the details of the UI Actor.  As in the DAQ actor, the first step is to specify the data that the actor will contain, in this case in the “UI Actor.ctl” control.  The UI actor needs a reference to the numeric indicator on its front panel to display the data it receives from the DAQ actor.  Although there are several ways for UI actors to update their front panels, my preference is to use references to the UI controls and indicators.  It is also fairly common, and perfectly valid, to use User Events for this purpose, but I’ve found that references tend to be more flexible and less cumbersome.  To continue, drop in a Control Refnum and set its type to numeric as shown in the following images.  Be sure to save and close “UI Actor.ctl” before continuing to the next steps.


To complete the UI actor, fill in the Actor Core and Update Data Ind Vis as shown in the following images.

Actor Core


Update Data Ind

Let’s take a moment to discuss what’s happening here.  The UI Actor Core VI will serve as the main user interface for our application.  When the UI Actor Core VI is called, it launches the DAQ Actor as a “Nested” actor.  This means that when the UI Actor receives a stop message, it will also tell the DAQ Actor to stop.  This is why we only send the stop message to the UI Actor in the Panel Close event.  Note: This is a new feature in the LabVIEW 2014 version of the Actor Framework.  Earlier versions of the Actor Framework did not have the concept of nested actors.  In the event that handles the Read button click, we send a message to the DAQ Actor telling it to call its Read VI.  The Read VI reads a data point and sends it back to the UI Actor by sending it a message that calls its Update Data Ind VI.  The Update Data Ind VI uses the reference to the Numeric indicator to update the front panel with the data point value.

All that’s left to do is to launch our application.  To do this, all we have to do is launch the UI actor as a Root Actor.  Fill in the Launch VI as shown below to do this.  It’s worth noting that the LabVIEW 2014 version of the Actor Framework greatly simplified the code required to launch an actor.

 Run the Launch VI and verify that clicking the Read button properly reads a value and displays it in the Data numeric indicator.  Closing the VI should stop the application and unlock all of the libraries in your project.

Congratulations on completing this tutorial.  Hopefully you now have a stronger understanding of how to use the Actor Framework in your applications.  In future articles, I will be discussing some of the pros and cons of the architectural decisions made in this tutorial.  For example, the UI and DAQ actors in this example are dependent on each other, since they call each other’s messages directly.  It is possible to loosen or completely eliminate this coupling by using techniques like generic messages and the observer pattern.  These techniques come at the cost of increased complexity, however.  Stay tuned for future articles where we discuss these topics further!

Related Links

Getting Started with the Actor Framework - Part I


Category: Tags:


It's interesting to learn AF with your article. I'm midway through it but wanted to highlight it, please correct that, "Send Update" is in the class "Update Data Ind Msg.lvclass"..

It's not as

There are a few points worth noting here. First, the “Send Update Data” VI is in the “Send Update Data Ind.lvclass” message class.

I get an error when running the example code above (-88708) that leads me to wonder if the Pre Launch Init is getting called. Is there a way to confirm this? The front panel of Pre Launch Init does not show any error.

Pre Launch Init is a reentrant VI, so you can't simply probe the VI like you would in a standard non-reentrant VI.  Instead, you can debug by placing a breakpoint in the VI before you run it.  Most of the actor framework override VIs are reentrant, so you will find that you will use breakpoints frequently when using the actor framework.

I'm not sure I completely understand this question, but it is worth noting that you should make sure you correctly populate your method's connector pane before running the message maker script.  If you forget to wire the connector pane, the message will be created incorrectly and you will need to fix the connector pane and re-run the message maker script.  One of the advantages on the MGI message maker is that it allows you to run it multiple times on the same method to "update" the message class.  The original actor framework message maker did not allow you to run the script more than once, so you would have to update the messages manually, which is rather tedious.

Great Tutorial, it helped me a lot understanding the basics.
There is though a little thing missing:

In order to link the numeric single shot output from the DAQmx device to the "Send Update Data", a numeric control is needed inside this vi. If you use the MSI message maker, you need to add a numeric control inside the "Update Data Ind Msg.ctl" cluster, which is found inside the "Update Data Ind" class.

Then you´ll have to update with the MSI Message maker (Build/Update Selected Message(s)) and a numeric control will be added and wired inside the "Send Update Data" and you will be able to complete the diagram described in the picture called "Read".

I hope this helped.

Have fun.

new comer learning AF ,I cant found part II resource .And MGI creat wrong message for'do.VI'
So I have to re-wire 'Do.VI'.And wait for your new articles about AF,it would be very appreciate.